To Work With Trimming Surfaces
Trim a Surface
- Click Surface tabCreate panelTrim. Find
- Select the surface and press Enter.
- Select the cutting curves and press Enter.
- Select the surface areas to remove and press Enter.
The selected areas are remove d.
Trim a Surface to a Projected Curve
Use this procedure to use geometry that visually intersects a surface from the current
view as a cutting edge for trimming.
- Click Surface tabProject Geometry panelAuto Trim. Find
- Click Surface tabProject Geometry panelProject to View. Find
- Select the object to project onto the surface and press Enter.
- Select a surface as the target and press Enter.
Restore a Trimmed Surface
Use this procedure to restore geometry that was trimmed using SURFTRIM.
- Click Surface tabCreate panelUntrim. Find
- Select a visible part of the surface and press Enter.
The trimmed areas are replaced.
edges. In this case, some untrim actions may not be possible.
Related References
lect the surface areas to remove and press Enter. The selected areas are remove d. Trim a Surface to a Projected Curve Use this procedure to use geometry …surface areas to remove and press Enter. The selected areas are removed. Trim a Surface to a Projected Curve Use this procedure to use geometry …use a surface, plane, or sketch as a trim tool to trim intersecting surfaces. You can also use a surface in conjunction with additional surfaces, as mutual trim tools. … Select a surface, sketch entity, curve, or plane in the graphics area as the tool that trims other …use a surface, plane, or sketch as a trim tool to trim intersecting surfaces. You can also use a surface in conjunction with additional surfaces, as mutual …Trimming Surfaces with Geometry. 3895 Views; |; Level: … PTC Creo Unite Technology – Working in a Multi-CAD Environment. |; 700 Views; |; Introductory Level …… I had mirrored (using Face) a surface along a plane and when i try to … Tried extruding the sketch and trying to use the common trim and still …surfaces (planes) thanks to other surfaces … each cones but to keep all the planes separately.. it doesn't work.Trimmed surfaces are created with commands that trim or split surfaces with curves and … Some Rhino commands work only with untrimmed surfaces and some …trimmed surface? Thanks … Default. Did you use the SLICE command or the TRIM command?… When working with surfaces in SOLIDWORKS you would typically convert a surface into … Converting Surface into Solid using Trim Surface.