To-Work-With-Adaptive-Degradation

To Work With Adaptive Degradation

To Work With Adaptive Degradation

Adaptive degradation is a way to control performance of effects as you use them.

With adaptive degradation on, if performance goes below the number of frames per
second (FPS) you specify, effects are turned off or turned down in a certain order
until performance returns to an acceptable level.

Toggle Adaptive Degradation

  1. At the Command prompt, enter -GRAPHICSCONFIG.
  2. Enter a (Adaptive Degradation) and select a mode.

Set the Performance Level for Adaptive Degradation

  1. At the Command prompt, enter -GRAPHICSCONFIG.
  2. Enter a (Adaptive Degradation) and select ON mode.
  3. Enter a number of frames per second.

Learning AutoCad

>Adaptive degradation is a way to control performance of effects as you use them. With adaptive degradation on, if performance goes below the number of frames …Adaptive degradation is a way to manage graphics performance by maintaining a minimum number of frames per second. With adaptive degradation on, if performance goes below the number of frames per second (FPS) that you specify, effects are turned off or turned down until …Adaptive degradation is a way to control performance of effects as you use them. To enable Adaptive Degradation and Performance Tuning Dialog Box …adaptive degradation on, if performance goes below the specified level, effects are … The performance tuner reads your system and decides whether to use …Adaptive degradation can improve viewport performance when you … Status bar > (Adaptive Degradation) Keyboard > O (the letter O) toggles adaptive degradation. … Except where otherwise noted, work provided on Autodesk Knowledge …adaptive degradation turned on, effects are reduced automatically to maintain an … The Performance Tuner reads your system and decides whether to use …… In the "Adaptive Degradation and Performance Tuning" dialog box uncheck " Adaptive … Uncheck "Use Hardware Acceleration (Direct3D)".… You need to use – prefix to suppress the dialog box and get the option in command … Enter option [acceLeration/Adaptive degradation/General …

درباره نویسنده



بنده سیامک دوستداری فارغ التحصیل رشته مکانیک سنگ از دانشگاه صنعتی اصفهان هستم، و در این وبسایت آموزش های مربوط به نحوه برنامه نویسی در اتوکد و هچنین آموزش تصویری دستورات اتوکد را قرار خواهم داد.

تلفن همراه: ۰۹۰۰۱۲۳۴۴۴۴

ایمیل: s.doostdari@gmail.com

ترفند های اتوکد



نظرات کاربران