Sun-Properties-Palette

Sun Properties Palette

    Sun Properties Palette

    Sets and modifies the properties of the sun and sky.

    List of Options

    The following options are displayed.

    General

    Sets the general properties of the sun.

    Status

    Turns the sun on and off. If lighting is not enabled in the drawing, this setting
    has no effect.

    Intensity Factor

    Sets the intensity or brightness of the sun. The range is from 0 (no light) to maximum.
    The higher the number, the brighter the light.

    Color (Standard lighting workflow only)

    Controls the color of the light.

    Shadows

    Turns display and calculation of shadows for the sun on and off. Turning shadows off
    increases performance.

    Sky Properties

    The sky general properties are as follows:

    Status

    Determines if the sky illumination is computed at render time. This has no impact
    on the viewport illumination or the background. It simply makes the sky available
    as a gathered light source for rendering. Note this does not control the background.
    Values are Sky Off, Sky Background, Sky Background and Illumination. [Sky Off] is
    default.

    Intensity Factor

    Provides a way to magnify the effect of the skylight. Values are 0.0-MAX. [1.0] is
    default.

    Haze

    Determines the magnitude of scattering effects in the atmosphere. Values are 0.0-15.0.
    [0.0] is default.

    Horizon

    This category of properties pertains to the appearance and location of the ground
    plane.

    Height

    Determines the absolute position of the ground plane relative to world zero. This
    parameter represents a world-space length and should be formatted in the current length
    unit. Values are -10.0 to +10.0 [0.0] is default.

    Blur

    Determines the amount of blurring between ground plane and sky. Values are 0-10. [.1] is default.

    Ground Color

    Determines the color of the ground plane.

    Advanced

    This category of properties pertains to various artistic effects.

    Night Color

    Specifies the color of the night sky.

    Aerial Perspective

    Specifies if aerial perspective is applied. Values are On/Off.

    Visibility Distance

    Specifies the distance at which 10% haze occlusion results. Values are 0.0-MAX.

    Sun Disk Appearance

    This category of properties pertains to the background only. They control the appearance
    of the sun disk.

    Disk Scale

    Specifies the scale of the sun disk (1.0 = correct size).

    Glow Intensity

    Specifies the intensity of the sun glow. Values are 0.0-25.0.

    Disk Intensity

    Specifies the intensity of the sun disk. Values are 0.0-25.0.

    Sun Angle Calculator

    Sets the angle of the sun.

    Date

    Displays the current date setting.

    Time

    Displays the current time setting.

    Daylight Saving

    Displays the current setting for daylight saving time.

    Azimuth

    Displays the angle of the sun along the horizon clockwise from due north. This setting
    is read-only.

    Altitude

    Displays the angle of the sun vertically from the horizon. The maximum is 90 degrees,
    or directly overhead. This setting is read-only.

    Source Vector

    Displays the coordinates of the direction of the sun. This setting is read-only.

    Rendered Shadow Details

    Specifies the properties of the shadows.

    Type

    Displays the setting for shadow type. This setting is read-only when display of shadows
    is turned off. The selections are Sharp, Soft (mapped) which display the Map size
    option and Soft (area) which displays the Samples option. Soft (area) is the only
    option for the sun in photometric workflow (LIGHTINGUNITS = 1 or 2).

    Map size (Standard lighting workflow only)

    Displays the size of the shadow map. This setting is read-only when display of shadows
    is turned off. Values are 0-1000.

    Samples

    Specifies the number of samples to take on the solar disk. This setting is read-only
    when display of shadows is turned off. Values are 0-1000.

    Softness

    Displays the setting for the appearance of the edges of shadows. This setting is read-only
    when display of shadows is turned off. Values are 1-10.

    Geographic Location

    Displays the current geographic location settings. This information is read-only.
    When a city is not stored with latitude and longitude, the city does not appear in
    the list.

    Learning AutoCad

    ts and modifies the properties of the sun and sky. List of Options The following options are displayed. General Sets the general properties of the sun.sun properties. Registered … What exactly happened to the sun when you imported it? Why don't you just … Just set up a new sun with the Daylight System in Max. …. Properties Of Lines Not Showing Up In Properties Palette.… Sun, Mon, Tue, Wed, Thu, Fri, Sat … "No Selection" in AutoCAD Properties palette … Typically you would hear or notice something along these lines: "When I pick an item with the Properties task bar open, at the top I see "No …… With ObjectARX 2017, we have an API to get color same as that appear on Sun properties palette. The code is self explanatory. The API may …… The colour of SUN is calculated algorithmically based on geographic … have an API to get color same as that appear on Sun properties palette.

    درباره نویسنده



    بنده سیامک دوستداری فارغ التحصیل رشته مکانیک سنگ از دانشگاه صنعتی اصفهان هستم، و در این وبسایت آموزش های مربوط به نحوه برنامه نویسی در اتوکد و هچنین آموزش تصویری دستورات اتوکد را قرار خواهم داد.

    تلفن همراه: ۰۹۰۰۱۲۳۴۴۴۴

    ایمیل: s.doostdari@gmail.com

    ترفند های اتوکد



    نظرات کاربران