دو نقطه را با هم و یا یک نقطه به یک منحنی (یا پسوند یک منحنی) محدود می کند.
این دستور معادل گزینه Coincident در GEOMCONSTRAINT است. یک نقطه محدودیت در یک جسم را می توان همزمان با یک جسم یا یک نقطه محدودیت در یک شی دیگر ایجاد کرد.
در زیر موارد و اشیاء محدودیت معتبر وجود دارد:
با اجرای دستور پیام های زیر نمایش داده می شود.
نکته ای را برای محدود کردن مشخص می کند.
اولین نکته از مورد جسم را محدود می کند.
دومین نکته از مورد محدود بودن را مشخص می کند.
یک شی را برای محدود کردن انتخاب می کند.
اولین نکته از مورد جسم را محدود می کند.
نکات پی در پی را انتخاب می کند تا با شیء اول همزمان شود. گزینه Multiple هنگام استفاده از گزینه Object برای انتخاب اولین شی نمایش داده می شود.
اشیاء متعدد را انتخاب می کند. محدودیت های تصادفی برای اشیاء انتخاب شده با نقاط نامشخص که همزمان با یکدیگر هستند اعمال می شود . تعداد محدودیتهای اعمال شده در فوریت Command نمایش داده می شود. هنگامی که یک محدودیت تصادفی بین یک نقطه و یک قوس یا یک خط اعمال می شود ، می تواند بر روی خط یا قوس یا پسوند خط یا قوس قرار گیرد.
Constrains two points together or a point to a curve (or an extension of a curve).
This command is equivalent to the Coincident option in GEOMCONSTRAINT.
A constraint point on an object can be made coincident with an object or a constraint
point on another object.
Following are the valid constraint objects and points:
The following prompts are displayed.
Specifies a point to be constrained.
Specifies the first point of the object to be constrained.
Specifies the second point of the object to be constrained.
Selects an object to be constrained.
Specifies the first point of the object to be constrained.
Picks successive points to coincide with the first object. The Multiple option is
displayed when you use the Object option to select the first object.
Selects multiple objects. Coincident constraints are applied to selected objects with
unconstrained points that are coincident to each other.
The number of constraints applied is displayed at the Command prompt.
When a coincident constraint is applied between a point and an arc or line, the point
can lie on the line or arc or the extension of the line or arc.
بنده سیامک دوستداری فارغ التحصیل رشته مکانیک سنگ از دانشگاه صنعتی اصفهان هستم، و در این وبسایت آموزش های مربوط به نحوه برنامه نویسی در اتوکد و هچنین آموزش تصویری دستورات اتوکد را قرار خواهم داد.
تلفن همراه: ۰۹۰۰۱۲۳۴۴۴۴
ایمیل: s.doostdari@gmail.com