TORUS-Command

TORUS (Command)

    TORUS (Command)

    Creates a donut-shaped 3D solid.

    Find

    You can create a torus by specifying the center, then the radius or diameter of the
    torus, and then the radius or diameter of the tube that surrounds the torus. You can
    control the smoothness of curved 3D solids, such as a torus, in a shaded or hidden
    visual style with the FACETRES system variable.

    The following prompts are displayed.

    Center point

    Specifies the center point of the torus.

    When you specify the center point, the torus is positioned so that its central axis
    is parallel to the Z axis of the current user coordinate system (UCS). The torus is parallel to and bisected
    by the XY plane of the current workplane.

    3P (Three Points)

    Defines the circumference of the torus with three points that you specify. The three
    specified points also define the plane of the circumference.

    2P (Two Points)

    Defines the circumference of the torus with two points that you specify. The plane
    of the circumference is defined by the Z value of the first point.

    TTR (Tangent, Tangent, Radius)

    Defines the torus with a specified radius tangent to two objects. The specified tangency
    points are projected onto the current UCS.

    Radius

    Defines the radius of the torus: the distance from the center of the torus to the
    center of the tube. A negative radius creates a solid shaped like an American football.

    Radius

    Defines the radius of the tube.

    Diameter

    Defines the diameter of the tube.

    Diameter

    Defines the diameter of the torus.

    • Radius
    • Diameter

    Learning AutoCad

    eates a donut-shaped 3D solid. Find You can create a torus by specifying the center, then the radius or diameter of the torus, and then the radius or diameter …Torus Menu: Draw 3D …TORUS command description: Draws a 3D torus. You can run the TORUS command …6 Aug 201626 May 2011commands in … if the . torus.json and defaults should be considered during command execution. core.Torus command requires input to tell it which part of your organization structure you're interacting with. Typically this information is passed through …Torus command draws a torus (donut shape). Steps … 2 . After drawing the base circle, pick the radius for the torus cross section.