To-Work-With-Creating-Polysolids

To Work With Creating Polysolids

    To Work With Creating Polysolids

    Create a Polysolid

    1. Click Home tabModeling panelPolysolid. Find
    2. At the Command prompt, enter h (Height) and enter the height of the polysolid object.
    3. Enter w (Width) and enter the width.
    4. Specify a start point.
    5. Specify the next point. You can switch between straight and curved segments:
      • To create a curved segment, at the Command prompt, enter a (Arc) before specifying the next point.
      • To create a straight segment, enter L (Line) before specifying the next point.
    6. Continue to specify points until you have finished creating the object.
    7. To complete the object, press Enter or enter c (Close) to connect the start point to the endpoint.

    Create a Polysolid From an Existing Object

    1. Click Home tabModeling panelPolysolid. Find
    2. At the Command prompt, enter o (Object).
    3. Select a 2D object such as a line, polyline, arc, or circle.

      A 3D polysolid is created using the current height and width settings. The original
      2D object is deleted or retained, depending on the setting of the DELOBJ system variable.

    Learning AutoCad

    >Create a Polysolid Click Home tabModeling panelPolysolid. Find At the Command prompt, enter h (Height) and enter the height of the polysolid object. Enter w …Create a Polysolid Click Home tabModeling panelPolysolid. Find At the Command prompt, enter h (Height) and enter the height of the polysolid object. Enter w …create a 3D solid with POLYSOLID just as you would a polyline. … point of the polysolid. At least three points must be specified to use this option.Polysolids are like 3D polylines that come with a thickness. You can use them to quickly create walls based on a 2D floor plan. The result is a swept solid.Jan 17, 2014create the foundation of our house,…and use the Polysolid tool to draw the inner walls.…Let's start by making the foundation layer active,…it's …working with this command, note the clause in the command line prompt.Polysolids are like 3D polylines that come with a thickness. You can use them to quickly create walls based on a 2D floor plan. The result is a …