To-Rotate-the-UCS-About-the-X–Y–or-Z-Axis

To Rotate the UCS About the X , Y , or Z Axis

To Rotate the UCS About the X , Y , or Z Axis

  • Right-click the UCS icon, and click Rotate Axis. Click X, Y, or Z.

    As you drag the cursor, the UCS rotates in the positive direction around the specified
    axis. You can also specify a rotation angle.

    TIP:Hover over the grips at the ends of the X, Y, and Z axes to access the rotate options.

Learning AutoCad

ght-click the UCS icon, and click Rotate Axis. Click X, Y, or Z. As you drag the cursor, the UCS rotates in the positive direction around the specified axis.UCS icon, and click Rotate Axis. Click X, Y, or Z. As you drag the cursor, the UCS rotates in the positive direction around the specified axis.… So in order to rotate our view, we need to rotate the X and Y axes to a new … click the "Z" button (or type UCS–>Z) and enter 90 (remember that …rotate 360 degree circle on the horizontal plane, … Sorry, should have been rotate the X or Y. UCS, X, 90 for example.UCS X = 90 degree, Y = 0 degree and Z remain the same as height. … But if you need to rotate the ucs around the z axis.z" is not a part of this example, it is basically irrelevant, but the .y or .x value … the Point Filters because it has no ability to deal with the Zaxis of the UCS; i.e., … because it cuts back on extra commands involving Rotating the UCS icon.