• At a prompt for a point, enter UCS coordinates using the following format:

  @ x , y

• Turn off dynamic input. At a prompt for a point, enter WCS coordinates using the following
  format:

  @ * x , y

Learning AutoCad

sp>Use relative coordinates when you know the location of a point in relation to the previous point. To specify relative coordinates, precede the coordinate values with an @ sign. For example, entering @3,4 specifies a point 3 units along the X axis and 4 units along the Y axis from the last point specified.enter UCS coordinates using the following format: @ x , y Turn off dynamic input.enter UCS coordinates using the following format: @ x , y Turn off dynamic input.To Enter Relative 2D Cartesian Coordinates. At a prompt for a point, enter UCS coordinates using the following format: @ x , y. Turn off dynamic input.Relative rectangular coordinates are points that are located at some distance from … the system to use the X and Y coordinates for a set of points on the desktop.Cartesian coordinates we can use absolute or relative Cartesian coordinates to locate points, to use the Cartesian coordinates we enter …… The 2D plane is a XY plane, also called construction plane. … Another, simpler method is to use relative Cartesian coordinates: you specify a …Enter coordinates as absolute or relative values. To specify the … Input, Example. Cartesian (2D / 3D), @deltaX,deltaY / @deltaX,deltaY,deltaZ, @3.5,8.2,6.7.… You can enter two-dimensional coordinates as either Cartesian (X,Y) or polar … In 2D, you specify points on the XY plane, also called the construction plane. … Relative Coordinate entry is simply specifying the next point as it …coordinate system, enter … Keywords: Cartesian Coordinate System; Absolut; Relative; Polar; Draw Bar; Modify Bar ….. [ 1] Randy H. Shih “Autocad 2013 Tutorial – First Level:2D Fundamentals”, 2013.