لیسپ های کاربردی اتوکد

To-Change-the-Linetype-of-Selected-Objects

To Change the Linetype of Selected Objects

To Change the Linetype of Selected Objects

  1. Select the objects.
  2. Right-click in the drawing area, and choose Properties from the shortcut menu.
  3. In the Properties palette, click Linetype, and then the down arrow. From the drop-down
    list, choose the linetype that you want to assign to the objects.
  4. Press Esc to remove the selection.
NOTE:

  • The linetype that you specify overrides the default layer linetype for the selected
    objects.
  • If the linetype you want to use is not on the drop-down list, follow the steps in
    the task, To Load a Linetype.

Learning AutoCad

sp>Select the objects. Right-click one of the objects, and choose Properties from the shortcut menu. In the Properties Inspector, click Linetype Scale and enter the new value.linetype displays objects with a solid, unbroken pattern. … current in the Properties panel of the ribbon Home tab when no objects are selected. … You can change the linetype scale of an existing object in the Properties palette.Change the Linetype Display Style of Selected 2D Polylines. Select the 2D polylines that you want to change. Right-click in the drawing area, and choose Properties. In the Properties palette, click Linetype Generation, and then click the down arrow. Do one of the following:linetypes to objects either by layer or by specifying the linetype explicitly, … and the Home tab, Properties panel of the ribbon when no objects are selected. If the current linetype is set to ByLayer, objects are created with the linetype …Select Linetype dialog box, choose the linetype that you want to use. … for all objects on the layer that have a ByLayer setting for their linetype property.to change the following properties of the display … change the display property settings for a selected object display component in the current …Select an object and open the properties palette (Pro feature). … over a location until a magnifying glass appears, allowing you to set snap points.objects with a specific line type, select that line type before you draw. … You can change the line type of existing objects (lines, curves, and so on) in the …select "Lines", you should now see the properties for just the lines you selected. You should now be able to change the linetype scale …select the ""Override"" button. Pull down … This method will change the linetype to dashed for all objects of that type. 2. Select …