POLYSOLID-Command

POLYSOLID (Command)

    POLYSOLID (Command)

    Creates 3D wall-like solid.

    Find

    You can create walls with straight and curved segments of constant height and width.

    With the POLYSOLID command, you can convert an existing line, 2D polyline, arc, or
    circle to a solid with a rectangular profile. A polysolid can have curved segments,
    but the profile is always rectangular by default.

    You can draw a solid with POLYSOLID just as you would a polyline. The PSOLWIDTH system
    variable sets the default width for the solid. The PSOLHEIGHT system variable sets
    the default height for the solid.

    The following prompts are displayed.

    Start point

    Specifies a starting point for a polysolid segment.

    Object

    Specifies an object to convert to a solid. You can convert:

    • Line
    • Arc
    • 2D polyline
    • Circle

    Height

    Specifies the height of the solid. The default height is set to the current PSOLHEIGHT
    setting.

    Width

    Specifies the width of the solid. The default width is set to the current PSOLWIDTH
    setting.

    Justify

    Sets the width and height of the solid to be left, right, or center justified when
    defining the profile with the command. The justification is based on the starting
    direction of the first segment of the profile.

    Next Point

    Specifies the next point of the polysolid profile.

    Arc

    Adds an arc segment to the solid. The default starting direction of the arc is tangent
    to the last drawn segment. You can specify a different starting direction with the
    Direction option.

    Close

    Closes the solid by creating a linear or arc segment from the last vertex to the start
    of the solid.

    Direction

    Specifies the arc segment by setting a starting tangent direction and an endpoint.

    Line

    Exits the Arc prompt and draws straight-line segments.

    Second Point

    Specifies the second point and endpoint of a three-point arc segment.

    Undo

    Removes the most recent arc segment added to the solid.

    Close

    Closes the polysolid by creating a line or arc segment from the last point specified
    to the starting point of the solid. At least three points must be specified to use
    this option.

    Undo

    Removes the most recent segment added to the solid.

    Learning AutoCad

    eates 3D solid in the shape of a wall or series of walls. … You can create 3D walls with straight and curved segments of constant height and width. … You can also convert existing 2D objects such as lines, 2D polylines, arcs, and circles to 3D solids with a default height, width, and …POLYSOLID command, you can convert an existing line, 2D polyline, arc, or circle to a solid with a rectangular profile. … You can draw a solid with POLYSOLID just as you would a polyline.Feb 3, 2017Jan 17, 2014Dec 13, 2009Nov 29, 2012command in AutoCAD – Polysolid. PLOYSOLID command on the toolbar MODELING is used to transform (convert) 2D lines in the 3D model. Line; 2D …POLYSOLID command, choose Polygold from the Modeling toolbar. In 2009 …POLYSOLID command in the main language versions of AutoCAD: In AutoCAD since version 2007. Command not available in AutoCAD LT. POLYSOLID …