Plot-Dialog-Box

Plot Dialog Box

Plot Dialog Box

Specifies device and media settings, and plots your drawing.

You can display more options by clicking the More Options button.

List of Options

The following options are displayed.

Page Setup

Displays a list of any named and saved page setups in the drawing. You can base the
current page setup on a named page setup saved in the drawing, or you can create a
new named page setup based on the current settings in the Plot dialog box by clicking
Add.

Name

Displays the name of the current page setup.

Add

Displays the Add Page Setup dialog box, in which you can save the current settings
in the Plot dialog box to a named page setup. You can modify this page setup through
the Page Setup Manager.

Printer/Plotter

Specifies a configured plotting device to use when plotting layouts.

If the selected plotter doesn’t support the layout’s selected paper size, a warning
is displayed and you can select the plotter’s default paper size or a custom paper
size.

Name

Lists the available PC3 files or system printers from which you can select to plot
the current layout. An icon in front of the device name identifies it as a PC3 file
or a system printer.

  • PC3 file icon. Indicates a PC3 file.
  • System printer icon. Indicates a system printer.
Properties

Displays the Plotter Configuration Editor (PC3 editor), in which you can view or modify
the current plotter configuration, ports, device, and media settings.

If you make changes to the PC3 file using the Plotter Configuration Editor, the Changes
to a Printer Configuration File dialog box is displayed.

Plotter

Displays the plot device specified in the currently selected page setup.

Where

Displays the physical location of the output device specified in the currently selected
page setup.

Description

Displays descriptive text about the output device specified in the currently selected
page setup. You can edit this text in the Plotter Configuration Editor.

Plot to File

Plots output to a file rather than to a plotter or printer. The default location for
plot files is specified in the Options dialog box, Plot and Publish tab, under Default
Location for Plot-to-File Operations.

If the Plot to File option is turned on, when you click OK in the Plot dialog box,
the Plot to File dialog box (a standard file navigation dialog box) is displayed.

PDF Options
Displays the PDF Options dialog box, which gives you the ability to optimize a PDF
file for the specific purpose you are creating it. This button is visible only if
you choose a plotter configuration (PC3) file that generates a PDF file.
Partial Preview

Shows an accurate representation of the effective plot area relative to the paper
size and printable area. The tooltip displays the paper size and printable area.

Paper Size

Displays standard paper sizes that are available for the selected plotting device.
If no plotter is selected, the full standard paper size list is displayed and available
for selection.

If the selected plotter doesn’t support the layout’s selected paper size, a warning
is displayed, and you can select the plotter’s default paper size or a custom paper
size.

A default paper size is set for the plotting device when you create a PC3 file with
the Add-a-Plotter wizard. The paper size that you select in the Page Setup dialog
box is saved with the layout and overrides the PC3 file settings.

The actual printable area of the page, which is determined by the selected plotting
device and paper size, is indicated in the layout by a dashed line.

If you are plotting a raster image, such as a BMP or TIFF file, the size of the plot
is specified in pixels, not in inches or millimeters.

Number of Copies

Specifies the number of copies to plot. This option is not available when you plot
to file.

Plot Area

Specifies the portion of the drawing to be plotted. Under What to Plot, you can select
an area of the drawing to be plotted.

Layout/Limits

When plotting a layout, plots everything within the printable area of the specified
paper size, with the origin calculated from 0,0 in the layout.

When plotting from the Model tab, plots the entire drawing area that is defined by
the grid limits. If the current viewport does not display a plan view, this option
has the same effect as the Extents option.

Extents

Plots the portion of the current space of the drawing that contains objects. All geometry
in the current space is plotted. The drawing may be regenerated to recalculate the
extents before plotting.

Display

Plots the view in the current viewport in the selected Model tab or the current paper
space view in the layout.

View

Plots a view that was previously saved with the VIEW command. You can select a named
view from the list. If there are no saved views in the drawing, this option is unavailable.

When the View option is selected, a View list is displayed that lists the named views
that are saved in the current drawing. You can select a view from this list to plot.

Window

Plots any portion of the drawing that you specify. When you select Window, the Window
button becomes available. Click the Window button to use the pointing device to specify
the two corners of the area to be plotted, or enter coordinate values.

Plot Offset

Specifies an offset of the plot area relative to the lower-left corner of the printable
area or to the edge of the paper, depending on the setting made in the Specify Plot
Offset Relative To option (Options dialog box, Plot and Publish tab). The Plot Offset
area of the Plot dialog box displays the specified plot offset option in parentheses.

The printable area of a drawing sheet is defined by the selected output device and
is represented by a dashed line in a layout. When you change to another output device,
the printable area may change.

You can offset the geometry on the paper by entering a positive or negative value
in the X and Y offset boxes. The plotter unit values are in inches or millimeters
on the paper.

Center the Plot

Automatically calculates the X and Y offset values to center the plot on the paper. This option is not available when
Plot Area is set to Layout.

X

Specifies the plot origin in the X direction relative to the setting of the Plot Offset Definition option.

Y

Specifies the plot origin in the Y direction relative to the setting of the Plot Offset Definition option.

Plot Scale

Controls the relative size of drawing units to plotted units. The default scale setting
is 1:1 when plotting a layout. The default setting is Fit to Paper when plotting from
the Model tab.

Fit to Paper

Scales the plot to fit within the selected paper size and displays the custom scale
factor in the Scale, Inch =, and Units boxes.

Scale

Defines the exact scale for the plot. Custom defines a user-defined scale. You can create a custom scale by entering the number
of inches (or millimeters) equal to the number of drawing units.

Inch(es) =/mm =/Pixel(s) =

Specifies the number of inches, millimeters, or pixels equal to the specified number
of units.

Inch/mm/pixel

Specifies inches or mm for display of units in the Plot dialog box. The default is
based on the paper size and changes each time a new paper size is selected. Pixel
is available only when a raster output is selected.

Units

Specifies the number of units equal to the specified number of inches, millimeters,
or pixels.

Scale Lineweights

Scales lineweights in proportion to the plot scale. Lineweights normally specify the
linewidth of plotted objects and are plotted with the linewidth size regardless of
the plot scale.

NOTE:You can modify the list of scales with SCALELISTEDIT.

Preview

Displays the drawing as it will appear when plotted by starting the PREVIEW command.
To exit the preview and return to the Plot dialog box, press ESC, press ENTER, or
right-click and then click Exit on the shortcut menu.

Apply to Layout

Saves the current Plot dialog box settings to the current layout.

More Options

Controls display of additional options in the Plot dialog box.

  • Plot Style Table (Pen Assignments)
  • Shaded Viewport Options
  • Plot Options
  • Drawing Orientation

Plot Style Table (Pen Assignments)

Sets the plot style table, edits the plot style table, or creates a new plot style
table.

Name (Unlabeled)

Displays the plot style table that is assigned to the current Model tab or layout
tab and provides a list of the currently available plot style tables.

If you select New, the Add Plot Style Table wizard is displayed, which you can use
to create a new plot style table. The wizard that is displayed is determined by whether
the current drawing is in color-dependent or named mode.

Edit

Displays the Plot Style Table Editor, in which you can view or modify plot styles
for the currently assigned plot style table.

Shaded Viewport Options

Specifies how shaded and rendered viewports are plotted and determines their resolution
level and dots per inch (dpi). Rendered viewport options are not available in AutoCAD
LT.

NOTE:When hardware acceleration is disabled or is enabled, but does not support Shadows,
it is possible to plot a drawing that contains shaded viewports with unsupported hardware
effects by the graphics card through software emulation. To enable the software emulation
of hardware effects that are not supported by your graphics card, enter 3DCONFIG and
click Manual Tune. In the Manual Performance Tuning dialog box, click Emulate unsupported
hardware effects in software when plotting. The unsupported effects will not appear
in the viewport in real-time, but will appear in the hardcopy or electronic file that
is created during the plot process. (Not applicable to AutoCAD LT)

Shade Plot

Specifies how views are plotted. To specify this setting for a viewport on a layout
tab, select the viewport and then, on the Tools menu, click Properties.

From the Model tab, you can select from the following options:

  • As Displayed. Plots objects the way they are displayed on the screen. (Available in AutoCAD LT)
  • Legacy Wireframe. Objects in wireframe regardless of the way they are displayed on the screen, using
    the legacy SHADEMODE command. (Available in AutoCAD LT)
  • Legacy Hidden. Objects with hidden lines removed regardless of the way the objects are displayed
    on the screen, using the legacy SHADEMODE command. (Available in AutoCAD LT)
  • Conceptual. Plots objects with the Conceptual visual style applied regardless of the way the
    objects are displayed on the screen.
  • Hidden. Plots objects with hidden lines removed regardless of the way the objects are displayed
    on the screen.
  • Realistic. Plots objects with the Realistic visual style applied regardless of the way the objects
    are displayed on the screen.
  • Shaded. Plots objects with Shaded visual style applied regardless of the way the objects
    are displayed on the screen
  • Shaded with Edges. Plots objects with Shaded with Edges visual style applied regardless of the way the
    objects are displayed on the screen
  • Shades of Gray. Plots objects with Shades of Gray visual style applied regardless of the way the
    objects are displayed on the screen.
  • Sketchy. Plots objects with Sketchy visual style applied regardless of the way the objects
    are displayed on the screen.
  • Wireframe. Plots objects in wireframe regardless of the way they are displayed on the screen.
  • X-ray. Plots objects with x-ray visual style applied regardless of the way the objects are
    displayed on the screen
  • Rendered. Plots objects as rendered regardless of the way they are displayed on the screen.
Quality

Specifies the resolution at which shaded and rendered viewports are plotted.

You can select from the following resolution options:

  • Draft. Sets rendered and shaded model space views to be plotted as wireframe.
  • Preview. Sets rendered and shaded model space views to be plotted at one quarter of the current
    device resolution, to a maximum of 150 dpi.
  • Normal. Sets rendered and shaded model space views to be plotted at one half of the current
    device resolution, to a maximum of 300 dpi.
  • Presentation. Sets rendered and shaded model space views to be plotted at the current device resolution,
    to a maximum of 600 dpi.
  • Maximum. Sets rendered and shaded model space views to be plotted at the current device resolution
    with no maximum.
  • Custom. Sets rendered and shaded model space views to be plotted at the resolution setting
    that you specify in the DPI box, up to the current device resolution.
DPI

Specifies the dots per inch for shaded and rendered views, up to the maximum resolution
of the current plotting device. This option is available if you select Custom in the
Quality box.

Plot Options

Specifies options for lineweights, transparency, plot styles, shaded plots, and the
order in which objects are plotted.

Plot in Background

Specifies that the plot is processed in the background. (BACKGROUNDPLOT system variable)

Plot Object Lineweights

Specifies whether lineweights assigned to objects and layers are plotted.

Plot Transparency

Specifies whether object transparency is plotted. This option should only be used
when plotting drawings with transparent objects.

IMPORTANT:For perfomance reasons, plotting transparency is disabled by default. To plot transparent
objects, select the Plot Transparency option. This setting can be overridden by the
PLOTTRANSPARENCYOVERRIDE system variable. By default, the system variable honors the
setting in the Page Setup and the Plot dialog boxes.

Plot with Plot Styles

Specifies whether plot styles applied to objects and layers are plotted.

Plot Paperspace Last

Plots model space geometry first. Paper space geometry is usually plotted before model
space geometry.

Hide Paperspace Objects

Specifies whether the HIDE operation applies to objects in the paper space viewport.
This option is available only from a layout tab. The effect of this setting is reflected
in the plot preview, but not in the layout.

Plot Stamp On

Turns on plot stamping. Places a plot stamp on a specified corner of each drawing
and/or logs it to a file.

Plot stamp settings are specified in the Plot Stamp dialog box, in which you can specify
the information that you want applied to the plot stamp, such as drawing name, date
and time, plot scale, and so on. To open the Plot Stamp dialog box, select the Plot
Stamp On option, and then click the Plot Stamp Settings button that is displayed to
the right of the option.

You can also open the Plot Stamp dialog box by clicking the Plot Stamp Settings button
on the Plot and Publish tab of the Options dialog box.

Plot Stamp Settings button

Displays the Plot Stamp dialog box when the Plot Stamp On option is selected in the
Plot dialog box.

Save Changes to Layout

Saves changes that you make in the Plot dialog box to the layout.

Drawing Orientation

Specifies the orientation of the drawing on the paper for plotters that support landscape
or portrait orientation. The paper icon represents the media orientation of the selected
paper. The letter icon represents the orientation of the drawing on the page.

Portrait

Orients and plots the drawing so that the short edge of the paper represents the top
of the page.

Landscape

Orients and plots the drawing so that the long edge of the paper represents the top
of the page.

Plot Upside-Down

Orients and plots the drawing upside down.

Icon

Indicates the media orientation of the selected paper and represents the orientation
of the drawing on the page as a letter on the paper.

NOTE:Drawing orientation is also affected by the PLOTROTMODE system variable.

Less Options

Hides the following options in the Plot dialog box:

  • Plot Style Table (Pen Assignments)
  • Shaded Viewport Options
  • Plot Options
  • Drawing Orientation

Learning AutoCad

>Plot Dialog Box. In-Product View Help. Applies to AutoCAD 2016, AutoCAD Architecture 2016, AutoCAD Civil 3D 2016, AutoCAD Electrical 2016, AutoCAD MEP …Plot dialog box is a child window used to display plots. … The Plot dialog box is displayed by clicking on the Missing image: toolbar plot button.bmp button …Plot dialog box by typing, enter …dialog box that lets you configure the behavior of the plotting software. Normally you only need to do this once to suit your particular …plot or publish the current layout …plotting dialog box. It appears I can't change CTB's on the fly like in 2K2. Or, do I have some …Plot icon looks like an ordinary desktop printer. AutoCAD opens the Plot– Model dialog box, with the title bar showing what you're plotting (Model, in this …