آ© ۲۰۱۵ Autodesk, Inc. All Rights Reserved. Except where otherwise noted, this work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike
۳.۰ Unported License that can be viewed online at http://creativecommons.org/licenses/by-nc-sa/3.0/.
This license content, applicable as of 16 December 2014 to this software product,
is reproduced here for offline users:
CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND DOES NOT PROVIDE LEGAL SERVICES.
DISTRIBUTION OF THIS LICENSE DOES NOT CREATE AN ATTORNEY-CLIENT RELATIONSHIP. CREATIVE
COMMONS PROVIDES THIS INFORMATION ON AN “AS-IS” BASIS. CREATIVE COMMONS MAKES NO WARRANTIES
REGARDING THE INFORMATION PROVIDED, AND DISCLAIMS LIABILITY FOR DAMAGES RESULTING
FROM ITS USE.
License
THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF THIS CREATIVE COMMONS PUBLIC
LICENSE (“CCPL” OR “LICENSE”). THE WORK IS PROTECTED BY COPYRIGHT AND/OR OTHER APPLICABLE
LAW. ANY USE OF THE WORK OTHER THAN AS AUTHORIZED UNDER THIS LICENSE OR COPYRIGHT
LAW IS PROHIBITED.
BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HERE, YOU ACCEPT AND AGREE TO BE BOUND
BY THE TERMS OF THIS LICENSE. TO THE EXTENT THIS LICENSE MAY BE CONSIDERED TO BE A
CONTRACT, THE LICENSOR GRANTS YOU THE RIGHTS CONTAINED HERE IN CONSIDERATION OF YOUR
ACCEPTANCE OF SUCH TERMS AND CONDITIONS.
۱. Definitions
a. “Adaptation” means a work based upon the Work, or upon the Work and other pre-existing works,
such as a translation, adaptation, derivative work, arrangement of music or other
alterations of a literary or artistic work, or phonogram or performance and includes
cinematographic adaptations or any other form in which the Work may be recast, transformed,
or adapted including in any form recognizably derived from the original, except that
a work that constitutes a Collection will not be considered an Adaptation for the
purpose of this License. For the avoidance of doubt, where the Work is a musical work,
performance or phonogram, the synchronization of the Work in timed-relation with a
moving image (“synching”) will be considered an Adaptation for the purpose of this
License.
b. “Collection” means a collection of literary or artistic works, such as encyclopedias and anthologies,
or performances, phonograms or broadcasts, or other works or subject matter other
than works listed in Section 1(g) below, which, by reason of the selection and arrangement
of their contents, constitute intellectual creations, in which the Work is included
in its entirety in unmodified form along with one or more other contributions, each
constituting separate and independent works in themselves, which together are assembled
into a collective whole. A work that constitutes a Collection will not be considered
an Adaptation (as defined above) for the purposes of this License.
c. “Distribute” means to make available to the public the original and copies of the Work or Adaptation,
as appropriate, through sale or other transfer of ownership.
d. “License Elements” means the following high-level license attributes as selected by Licensor and indicated
in the title of this License: Attribution, Noncommercial, ShareAlike.
e. “Licensor” means the individual, individuals, entity or entities that offer(s) the Work under
the terms of this License.
f. “Original Author” means, in the case of a literary or artistic work, the individual, individuals, entity
or entities who created the Work or if no individual or entity can be identified,
the publisher; and in addition (i) in the case of a performance the actors, singers,
musicians, dancers, and other persons who act, sing, deliver, declaim, play in, interpret
or otherwise perform literary or artistic works or expressions of folklore; (ii) in
the case of a phonogram the producer being the person or legal entity who first fixes
the sounds of a performance or other sounds; and, (iii) in the case of broadcasts,
the organization that transmits the broadcast.
g. “Work” means the literary and/or artistic work offered under the terms of this License including
without limitation any production in the literary, scientific and artistic domain,
whatever may be the mode or form of its expression including digital form, such as
a book, pamphlet and other writing; a lecture, address, sermon or other work of the
same nature; a dramatic or dramatico-musical work; a choreographic work or entertainment
in dumb show; a musical composition with or without words; a cinematographic work
to which are assimilated works expressed by a process analogous to cinematography;
a work of drawing, painting, architecture, sculpture, engraving or lithography; a
photographic work to which are assimilated works expressed by a process analogous
to photography; a work of applied art; an illustration, map, plan, sketch or three-dimensional
work relative to geography, topography, architecture or science; a performance; a
broadcast; a phonogram; a compilation of data to the extent it is protected as a copyrightable
work; or a work performed by a variety or circus performer to the extent it is not
otherwise considered a literary or artistic work.
h. “You” means an individual or entity exercising rights under this License who has not previously
violated the terms of this License with respect to the Work, or who has received express
permission from the Licensor to exercise rights under this License despite a previous
violation.
i. “Publicly Perform” means to perform public recitations of the Work and to communicate to the public
those public recitations, by any means or process, including by wire or wireless means
or public digital performances; to make available to the public Works in such a way
that members of the public may access these Works from a place and at a place individually
chosen by them; to perform the Work to the public by any means or process and the
communication to the public of the performances of the Work, including by public digital
performance; to broadcast and rebroadcast the Work by any means including signs, sounds
or images.
j. “Reproduce” means to make copies of the Work by any means including without limitation by sound
or visual recordings and the right of fixation and reproducing fixations of the Work,
including storage of a protected performance or phonogram in digital form or other
electronic medium.
۲. Fair Dealing Rights. Nothing in this License is intended to reduce, limit, or restrict any uses free from
copyright or rights arising from limitations or exceptions that are provided for in
connection with the copyright protection under copyright law or other applicable laws.
۳. License Grant. Subject to the terms and conditions of this License, Licensor hereby grants You a
worldwide, royalty-free, non-exclusive, perpetual (for the duration of the applicable
copyright) license to exercise the rights in the Work as stated below:
The above rights may be exercised in all media and formats whether now known or hereafter
devised. The above rights include the right to make such modifications as are technically
necessary to exercise the rights in other media and formats. Subject to Section 8(f),
all rights not expressly granted by Licensor are hereby reserved, including but not
limited to the rights described in Section 4(e).
۴. Restrictions. The license granted in Section 3 above is expressly made subject to and limited by
the following restrictions:
۵. Representations, Warranties and Disclaimer
UNLESS OTHERWISE MUTUALLY AGREED TO BY THE PARTIES IN WRITING AND TO THE FULLEST EXTENT
PERMITTED BY APPLICABLE LAW, LICENSOR OFFERS THE WORK AS-IS AND MAKES NO REPRESENTATIONS
OR WARRANTIES OF ANY KIND CONCERNING THE WORK, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE,
INCLUDING, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, NONINFRINGEMENT, OR THE ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY,
OR THE PRESENCE OF ABSENCE OF ERRORS, WHETHER OR NOT DISCOVERABLE. SOME JURISDICTIONS
DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THIS EXCLUSION MAY NOT APPLY
TO YOU.
۶. Limitation on Liability. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE LAW, IN NO EVENT WILL LICENSOR BE LIABLE
TO YOU ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR
EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE USE OF THE WORK, EVEN IF LICENSOR
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
۷. Termination
۸. Miscellaneous
Creative Commons Notice
Creative Commons is not a party to this License, and makes no warranty whatsoever
in connection with the Work. Creative Commons will not be liable to You or any party
on any legal theory for any damages whatsoever, including without limitation any general,
special, incidental or consequential damages arising in connection to this license.
Notwithstanding the foregoing two (2) sentences, if Creative Commons has expressly
identified itself as the Licensor hereunder, it shall have all rights and obligations
of Licensor.
Except for the limited purpose of indicating to the public that the Work is licensed
under the CCPL, Creative Commons does not authorize the use by either party of the
trademark “Creative Commons” or any related trademark or logo of Creative Commons
without the prior written consent of Creative Commons. Any permitted use will be in
compliance with Creative Commons’ then-current trademark usage VCadelines, as may
be published on its website or otherwise made available upon request from time to
time. For the avoidance of doubt, this trademark restriction does not form part of
this License.
Creative Commons may be contacted at http://creativecommons.org/.
Certain materials included in this publication are reprinted with the permission of
the copyright holder.
Autodesk’s Creative Commons FAQ can be viewed online at http://www.autodesk.com/company/creative-commons,
and is reproduced here for offline users.
In collaboration with Creative Commons, Autodesk invites you to share your knowledge
with the rest of the world, inspiring others to learn, achieve goals, and ignite creativity.
You can freely borrow from the Autodesk Help, Support and Video libraries to build
a new learning experience for anyone with a particular need or interest.
What is Creative Commons?
Creative Commons (CC) is a nonprofit organization that offers a simple licensing model
that frees digital content to enable anyone to modify, remix, and share creative works.
How do I know if Autodesk learning content and Autodesk University content is available
under Creative Commons?
All Autodesk learning content and Autodesk University content released under Creative
Commons is explicitly marked with a Creative Commons icon specifying what you can
and cannot do. Always follow the terms of the stated license.
What Autodesk learning content is currently available under Creative Commons?
Over time, Autodesk will release more and more learning content under the Creative
Commons licenses.
Currently available learning content:
Is Autodesk learning and support content copyrighted?
Yes. Creative Commons licensing does not replace copyright. Copyright remains with
Autodesk or its suppliers, as applicable. But it makes the terms of use much more
flexible.
What do the Autodesk Creative Commons licenses allow?
Autodesk makes some of its learning and support content available under two distinct
Creative Commons licenses. The learning content is clearly marked with the applicable
Creative Commons license. You must comply with the following conditions:
These conditions can be modified only by explicit permission of Autodesk, Inc. Send
requests for modifications outside of these license terms to creativecommons@autodesk.com.
Can I get special permission to do something different with the learning content?
Unless otherwise stated, our Creative Commons conditions can be modified only by explicit
permission of Autodesk, Inc. If you have any questions or requests for modifications
outside of these license terms, email us at creativecommons@autodesk.com.
How do I attribute Autodesk learning content?
You must explicitly credit Autodesk, Inc., as the original source of the materials.
This is a standard requirement of the Attribution (BY) term in all Creative Commons
licenses. In some cases, such as for the Autodesk video learning content, we specify
exactly how we would like to be attributed.
This is usually described on the video’s end-plate. For the most part providing the
title of the work, the URL where the work is hosted, and a credit to Autodesk, Inc.,
is quite acceptable. Also, remember to keep intact any copyright notice associated
with the work. This may sound like a lot of information, but there is flexibility
in the way you present it.
Here are some examples:
“This document contains content adapted from the Autodeskآ® Mayaآ® Help, available under
a Creative Commons Attribution-NonCommercial-Share Alike license. Copyright آ© Autodesk,
Inc.”
“This is a Finnish translation of a video created by the Autodesk Maya Learning Channel
@ www.youtube.com/mayahowtos. Copyright آ© Autodesk, Inc.”
“Special thanks to the Autodeskآ® ۳ds Maxآ® Learning Channel @ www.youtube.com/3dsmaxhowtos. Copyright آ© Autodesk, Inc.”
Do I follow YouTube’s standard license or Autodesk’s Creative Commons license?
The videos of the Autodesk Learning Channels on YouTube are uploaded under YouTube’s
standard license policy. Nonetheless, these videos are released by Autodesk as Creative
Commons Attribution-NonCommercial-No Derivative Works (CC BY-NC-ND) and are marked
as such.
You are free to use our video learning content according to the Creative Commons license
under which they are released.
Where can I easily download Autodesk learning videos?
Most of the Autodesk Learning Channels have an associated iTunes podcast from where
you can download the same videos and watch them offline. When translating Autodesk
learning videos, we recommend downloading the videos from the iTunes podcasts.
Can I translate Autodesk learning videos?
Yes. Even though our learning videos are licensed as No Derivative Works (ND), we
grant everyone permission to translate the audio and subtitles into other languages.
In fact, if you want to recapture the video tutorial as-is but show the user interface
in another language, you are free to do so. Be sure to give proper attribution as
indicated on the video’s Creative Commons end-plate. This special permission only
applies to translation projects. Requests for modifications outside of these license
terms can be directed to creativecommons@autodesk.com.
How do I let others know that I have translated Autodesk learning content into another
language?
Autodesk is happy to see its learning content translated into as many different languages
as possible. If you translate our videos or any of our learning content into other
languages, let us know. We can help promote your contributions to our growing multilingual
community. In fact, we encourage you to find creative ways to share our learning content
with your friends, family, students, colleagues, and communities around the world.
Contact us at creativecommons@autodesk.com.
I have translated Autodesk learning videos into other languages. Can I upload them
to my own YouTube channel?
Yes, please do and let us know where to find them so that we can help promote your
contributions to our growing multilingual Autodesk community. Contact us at creativecommons@autodesk.com.
Can I repost or republish Autodesk learning content on my site or blog?
Yes, you can make Autodesk learning material available on your site or blog as long
as you follow the terms of the Creative Commons license under which the learning content
is released. If you are simply referencing the learning content as-is, then we recommend
that you link to it or embed it from where it is hosted by Autodesk. That way the
content will always be fresh. If you have translated or remixed our learning content,
then by all means you can host it yourself. Let us know about it, and we can help
promote your contributions to our global learning community. Contact us at creativecommons@autodesk.com.
Can I show Autodesk learning content during my conference?
Yes, as long as it’s within the scope of a noncommercial event, and as long as you
comply with the terms of the Creative Commons license outlined above. In particular,
the videos must be shown unedited with the exception of modifications for the purpose
of translation. If you wish to use Autodesk learning content in a commercial context,
contact us with a request for permission at creativecommons@autodesk.com.
Can I use Autodesk learning content in my classroom?
Yes, as long as you comply with the terms of the Creative Commons license under which
the learning material is released. Many teachers use Autodesk learning content to
stimulate discussions with students or to complement course materials, and we encourage
you to do so as well.
Can I re-edit and remix Autodesk video learning content?
No, but for one exception. Our Creative Commons BY-NC-ND license clearly states that
“derivative works” of any kind (edits, cuts, remixes, mashups, and so on) are not
allowed without explicit permission from Autodesk. This is essential for preserving
the integrity of our instructors’ ideas. However, we do give you permission to modify
our videos for the purpose of translating them into other languages.
Can I re-edit and remix Autodesk downloadable 3D assets and footage?
Yes. The Autodesk Learning Channels on YouTube provide downloadable 3D assets, footage,
and other files for you to follow along with the video tutorials on your own time.
This downloadable material is made available under a Creative Commons Attribution-NonCommercial-ShareAlike
(CC BY-NC-SA) license. You can download these materials and experiment with them,
but your remixes must give us credit as the original source of the content and be
shared under the identical license terms.
Can I use content from Autodesk online help to create new materials for a specific
audience?
Yes, if you want to help a specific audience learn how to optimize the use of their
Autodesk software, there is no need to start from scratch. You can use, remix, or
enrich the relevant help content and include it in your book, instructions, examples,
or workflows you create, then Share-Alike with the community. Always be sure to comply
with the terms of the Creative Commons license under which the learning content is
released.
What are the best practices for marking content with Creative Commons Licenses?
When reusing a CC-licensed work (by sharing the original or a derivative based on
the original), it is important to keep intact any copyright notice associated with
the work, including the Creative Commons license being used. Make sure you abide by
the license conditions provided by the licensor, in this case Autodesk, Inc.
Trademarks
The following are registered trademarks or trademarks of Autodesk, Inc., and/or its
subsidiaries and/or affiliates in the USA and other countries: 123D, 3ds Max, Alias,
ATC, AutoCAD LT, AutoCAD, Autodesk, the Autodesk logo, Autodesk 123D, Autodesk Homestyler,
Autodesk Inventor, Autodesk MapVCade, Autodesk Streamline, AutoLISP, AutoSketch, AutoSnap,
AutoTrack, Backburner, Backdraft, Beast, BIM 360, Burn, Buzzsaw, CADmep, CAiCE, CAMduct,
Civil 3D, Combustion, Communication Specification, Configurator 360â„¢, Constructware,
Content Explorer, Creative Bridge, Dancing Baby (image), DesignCenter, DesignKids,
DesignStudio, Discreet, DWF, DWG, DWG (design/logo), DWG Extreme, DWG TrueConvert,
DWG TrueView, DWGX, DXF, Ecotect, ESTmep, Evolver, FABmep, Face Robot, FBX, Fempro,
Fire, Flame, Flare, Flint, ForceEffect, FormIt, Freewheel, Fusion 360, Glue, Green
Building Studio, Heidi, Homestyler, HumanIK, i-drop, ImageModeler, Incinerator, Inferno,
InfraWorks, InfraWorks 360, Instructables, Instructables (stylized robot design/logo),
Inventor, Inventor HSM, Inventor LT, Lustre, Maya, Maya LT, MIMI, Mockup 360, Moldflow
Plastics Advisers, Moldflow Plastics Insight, Moldflow, Moondust, MotionBuilder, Movimento,
MPA (design/logo), MPA, MPI (design/logo), MPX (design/logo), MPX, Mudbox, Navisworks,
ObjectARX, ObjectDBX, Opticore, Pixlr, Pixlr-o-matic, Productstream, Publisher 360,
RasterDWG, RealDWG, ReCap, ReCap 360, Remote, Revit LT, Revit, RiverCAD, Robot, Scaleform,
Showcase, Showcase 360, SketchBook, Smoke, Socialcam, Softimage, Sparks, SteeringWheels,
Stitcher, Stone, StormNET, TinkerBox, ToolClip, Topobase, Toxik, TrustedDWG, T-Splines,
ViewCube, Visual LISP, Visual, VRED, Wire, Wiretap, WiretapCentral, XSI.
All other brand names, product names or trademarks belong to their respective holders.
Disclaimer
THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK,
INC. “AS IS.” AUTODESK, INC. DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS.
spgal Notices. From: To: It's what you need when you want to find out about public hearings, court actions, bids and proposals, foreclosures, unclaimed property, liens, zoning notices, and so much more.LEGAL NOTICE LIEN SALE Date: 06/30/2017 Time: 9 am Location: 2455, 6/17/ … LEGAL NOTICE NOTICE OF HEARING ON NAME CHANGE (Adult) CASE NO.Notice. Browse Utah Newspapers. Basin Nickel. Beaver County Journal. Beaver Press. Blue Mountain Panorama. Box Elder News Journal.LEGAL NOTICES. Today's Virginia Trustee Sales · Today's Maryland Trustee Sales · Today's D.C. Trustee Sales · Want to place a legal notice in the print …foreclosures, hearings, advertisements for bids, financial reports, ordinances and INFORMATION ABOUT other government, BUSINESS AND JUDICIAL activities that are legally required to be published.Notices posted within the last four weeks. Visit our archives section to search for notices from up to 18 months ago.legal notices published in Florida newspapers including legals, probate, foreclosure, and all public notices. Public notices for Miami …Legal Notices Department.Notices: Popular. Popular …. Search Results > Public Notice Detail . Please use the Advanced Search Menu to find public notices. Use of this site …notices daily from newspapers in Ohio about foreclosures, hearings, advertisements for bids, financial reports, …
بنده سیامک دوستداری فارغ التحصیل رشته مکانیک سنگ از دانشگاه صنعتی اصفهان هستم، و در این وبسایت آموزش های مربوط به نحوه برنامه نویسی در اتوکد و هچنین آموزش تصویری دستورات اتوکد را قرار خواهم داد.
تلفن همراه: ۰۹۰۰۱۲۳۴۴۴۴
ایمیل: s.doostdari@gmail.com