Extract-Section-Lines-from-Point-Cloud-Dialog-Box

Extract Section Lines from Point Cloud Dialog Box

    Extract Section Lines from Point Cloud Dialog Box

    List of Options

    The following options are displayed.

    Extract

    Creates lines or 2D polylines along the estimated intersection of the point cloud
    with the section plane.

    Entire Cross Section
    Creates lines and 2D polylines along the intersection of the point cloud and the
    section plane, including the interior areas.
    Perimeter Only
    Creates lines and 2D polylines only along the intersection of the point cloud perimeter
    and the section plane.

    Output Geometry

    Specifies the layer, color, and object type of the extracted geometry.

    Layer
    Specifies the layer of the extracted geometry.
    Color
    Specifies the color of the extracted geometry.
    Line
    Specifies that planar surfaces are extracted as line objects. Curved surfaces are
    extracted as segmented 2D polylines.
    2D Polylines
    Specifies that planar surfaces are extracted as 2D polylines.
    Polyline Width

    Specifies the width of the 2D polylines that are extracted from point cloud.

    Maximum Points to Process

    Limits the number of points processed, and estimates the time to extract geometry.

    Extraction Tolerances

    Minimum Line Length
    The minimum segment length for lines and 2D polylines created. You can enter a value
    or specify two points.
    Connect Lines Tolerance
    Connects endpoints of nearby extracted line segments when the distance is less than
    the specified value. You can enter a value or specify two points.
    Collinear Angle Tolerance
    Determines the maximum angular deviation before an extracted line or 2D polyline
    is separated into segments. A high value generally produces fewer and longer lines.

    Preview Result

    Displays a preview of the result before you complete the extraction. This lets you
    adjust the settings and view the changes instantly.

    Create

    Displays the extracted geometry. You can accept the extracted geometry, bring up the
    dialog box to change the selected options, or undo the extracted geometry.

    Learning AutoCad

    st of Options The following options are displayed. Extract Creates lines or 2D polylines along the estimated intersection of the point cloud with the section …section must be enabled for the section object; the section boundary determines which points are considered when generating the section geometry from the point cloud. Select a point cloud with a section object. The Extract Section Line from Point Cloud dialog box is displayed.Extract Section Line from Point Cloud dialog box, specify the settings for the geometry to be created. Click Create to extract the underlying geometry …Section Panel Spinner Control dialog box. Sets the … or 3D blocks. Extract Section Lines: Creates 2D geometry from a point cloud for the active section plane.Extract Section Lines from Point. Cloud dialog box, select the Entire cross section and 2D Polylines radio …… I am sharing a tool with you that I am absolutely pumped about, the Extract Section Lines tool! With this new tool, point cloud is more useful than …… tunnel is extracted using a 2D projection of the point cloud and curve … cross- sectional points are extracted by intersecting straight lines that rotate …. Figure 1 shows a circular window with a predefined radius that is centered at the ….. yellow box on the left highlights the overlap between the curve and the …section extraction dialog.jpg … CloudCompare will extract all the points within this thickness (in 2D).section with 10 cm interval. … (for the bottom part) and with a width of 10 cm (use the box thickness 'Z ' field). … consider using the 'Rasterize' tool (which can extract contour lines … in order to extract contours of a point cloud and save them as polilines, …Dialog Box Enhancements. The number 3 AUGI ….. extract section lines from point clouds. 3D Modeling … point cloud to view the model from its scan position.