To Work With

To-Work-With-the-Status-Bar

برای کار با نوار وضعیت نحوه نمایش و تغییر نوار وضعیت. نوار وضعیت را روشن و خاموش کنید STATUSBAR را در خط فرمان وارد کنید و 1 را برای نمایش نوار وضعیت و 0 برای پنهان کردن نوار وضعیت انتخاب کنید. موارد نمایش داده شده در نوار وضعیت را تغییر دهید بر روی کشویی Customization کلیک کرده و موارد مورد ...

ادامه نوشته »

To-Work-With-Surface-Continuity-Analysis

برای کار با تجزیه و تحلیل پیوستگی سطح استمرار سطح را تجزیه و تحلیل کنید روی صفحه نمایش تجزیه و تحلیل زبرا سطح کلیک کنید . پیدا کردن یک سطح را انتخاب کنید و Enter را فشار دهید.نوارهای گورخر نمایش داده می شود. صفحه نمایش Zebra را خاموش کنید روی گزینه های تجزیه و تحلیل پانل تجزیه و تحلیل برگه Surface کلیک کنید . پیدا کردن در تب Zebra از کادر محاوره ای Analysis ...

ادامه نوشته »

To-Work-With-Shaded-Plot-Options

برای کار با گزینه های Plot Shaded می توانید نقشه ای را که حاوی مواد جامد 3D سایه دار است به عنوان نمایش داده شده ، در قالب سیم ، با خطوط پنهان برداشته شده یا همانطور که ارائه می شود ترسیم کنید. گزینه های Shaded Viewport را تنظیم کنید روی برگه طرح بندی که می خواهید گزینه های مشاهده ...

ادامه نوشته »

To-Work-With-Point-Cloud-Color-Stylizations-and-Color-Schemes

برای کار با سبک های ابر نقطه و طرح های رنگی نحوه انتخاب سبک های ابر نقطه ای و اختصاص طرح های رنگی. یک سبک سازی را انتخاب کنید کلیک کنید ابر نقطه تب  تجسم پانل شناور رنگ سبک به انتخاب یکی از گزینه های سبک زیر است.  پیدا کردن رنگ را اسکن کنید. این گزینه نقاط با رنگ های موجود در دنیای واقعی را ...

ادامه نوشته »

To-Work-With-Plot-Scale-Settings

برای کار با تنظیمات مقیاس Plot از مقیاس دنیای واقعی استفاده کنید بر روی زبانه خروجی Plot panel Plot کلیک کنید . پیدا کردن در کادر گفتگوی Plot ، در زیر Plot Scale ، مقیاس را از کادر Scale انتخاب کنید. OK را برای ترسیم نقشه کلیک کنید. از یک مقیاس سفارشی استفاده کنید بر روی زبانه خروجی Plot panel Plot کلیک کنید . پیدا کردن در کادر گفتگوی Plot ، در زیر مقیاس ...

ادامه نوشته »

To-Work-With-Model-Space-Viewports

برای کار با نماهای فضایی مدل برای ایجاد نمایشگرهای فضایی مدل های چندگانه کلیک کنید نمایش تب نمای پانل دیدگاه تنظیمات فلش کشویی . روی پیکربندی Viewport که می خواهید استفاده کنید کلیک کنید. نکته:کنترل های Viewport در گوشه سمت چپ بالای هر نمای نمایش داده می شوند ، که ممکن است به شکل زیر باشد: [-] [بالا] [2D Wireframe] برای تغییر شماره و ...

ادامه نوشته »

To-Work-With-Arcs

برای کار با کمان ها برای ایجاد یک قوس ، می توانید انواع مختلفی از مرکز ، نقطه انتهایی ، نقطه شروع ، شعاع ، زاویه ، طول وتر و مقادیر جهت را مشخص کنید. قوس را در جهت عقربه های ساعت بکشید به طور پیش فرض ، کمان ها در جهت خلاف جهت عقربه های ساعت کشیده می شوند. همانطور ...

ادامه نوشته »

To-Work-With-Xref-Paths

To Work With Xref Paths To Work With Xref Paths Change, remove, or make Xref paths relative. Modify file options to specify a project’s name or search path. Display the External References Palette Click View tab Palettes panel External References Palette. Find Change the Path of a DWG Reference Display the External References palette. Select a DWG reference name and, ...

ادامه نوشته »

To-Work-With-Workspaces

To Work With Workspaces To Work With Workspaces How to choose, modify, and save workspaces. Switch Workspaces On the status bar, click Workspace Switching and select the workspace you want to use. Find Change Workspace Settings On the status bar, click Workspace Switching, and select Workspace Settings. In the Workspace Settings dialog box, change workspace settings as needed. Save a ...

ادامه نوشته »

To-Work-With-Visual-Styles

To Work With Visual Styles To Work With Visual Styles Apply, save, import, and restore viewport visual styles. Apply a Visual Style to a Viewport Click View tabVisual Styles panel Visual Styles Manager. Find Click in the viewport to make it current. In the Visual Styles Manager, double-click the sample image of the visual style. The selected visual style is ...

ادامه نوشته »

To-Work-With-ViewCube-Display-Options

To Work With ViewCube Display Options To Work With ViewCube Display Options Control ViewCube settings and with which visual styles it is active. Show or Hide the ViewCube in the Current Drawing Click View tab Viewport Tools panel View Cube. Find Show or Hide the ViewCube by Visual Style Right-click the drawing area and choose Options. On the 3D Modeling ...

ادامه نوشته »

To-Work-With-Updating-Text-Fields

To Work With Updating Text Fields To Work With Updating Text Fields Update an Individual Field Double-click text. Select the field to update and right-click. Click Update Field. Update Multiple Fields Click Blocks & References tabData panelUpdate Fields . Find At the Select Objects prompt, select the objects that contain the fields you want to update and press Enter. All ...

ادامه نوشته »

To-Work-With-Trimming-Surfaces

To Work With Trimming Surfaces To Work With Trimming Surfaces Trim a Surface Click Surface tabCreate panelTrim. Find Select the surface and press Enter. Select the cutting curves and press Enter. Select the surface areas to remove and press Enter. The selected areas are remove d. Trim a Surface to a Projected Curve Use this procedure to use geometry that ...

ادامه نوشته »

To-Work-With-Tool-Palette-Groups

To Work With Tool Palette Groups To Work With Tool Palette Groups How to create, modify, and display a tool palette group. Create a Tool Palette Group Click Manage tab Customization panel Tool Palettes. Find In the Customize dialog box, under Palette Groups, right-click in the lower, blank area and select New Group. NOTE:If there are no groups listed in ...

ادامه نوشته »

To-Work-With-the-Recent-Documents-List-in-the-Start-tab

To Work With the Recent Documents List in the Start tab To Work With the Recent Documents List in the Start tab How to keep files in the list and modify the display of recently used documents. Pin Files Click the push pin button in the upper-right corner of the image or to the right of the file name. The ...

ادامه نوشته »

To-Work-With-the-Recent-Documents-List-in-the-Application-Menu

To Work With the Recent Documents List in the Application Menu To Work With the Recent Documents List in the Application Menu How to modify the display of recently used documents. Change the Number of Recent Documents Listed Click Tools Options. In the Options dialog box, click the Open and Save tab. Under Application Menu Number of Recently Used Files ...

ادامه نوشته »

To-Work-With-the-Quick-Access-Toolbar

To Work With the Quick Access Toolbar To Work With the Quick Access Toolbar How to add and remove commands from the Quick Access toolbar. Add a Command to the Quick Access Toolbar Right-click the Quick Access toolbar. Click Customize Quick Access Toolbar. In the Customize User Interface editor, drag a command from the Command list to the position you ...

ادامه نوشته »

To-Work-With-the-Query-Builder

To Work With the Query Builder To Work With the Query Builder Create queries based on multiple criteria using boolean operators and parenthetical groupings. Open the Query Editor Click Tools menu PalettesdbConnect. In the tree view, select a database table. Click the New Query button. Enter a name for the query in New Query Name. Click Continue to open the ...

ادامه نوشته »

To-Work-With-the-Online-Map

To Work With the Online Map To Work With the Online Map When signed in to Autodesk A360, you can turn on a map from an online maps service, which displays as a background in the current viewport. You can turn on the map only if the drawing file contains geographical location data. Display the Map as a Series of ...

ادامه نوشته »

To-Work-with-the-Content-Explorer-View

To Work with the Content Explorer View To Work with the Content Explorer View Change Icon Size Click the Change View Options arrow. Choose an icon size from the list at the top of the menu. Alternatively, just click the Toggle Icon Size button to cycle through the different sizes. Switch Between Thumbnail and Detail View Click the Change View ...

ادامه نوشته »

To-Work-With-the-Command-Line-Suggestion-List

To Work With the Command Line Suggestion List To Work With the Command Line Suggestion List How to change settings that control the suggestions displayed when you enter a command. Toggle Command Line Suggestion List Options In the command window, click Customize button Input Settings. On the Input Settings list, select one or more of the following options: AutoComplete. Specifies ...

ادامه نوشته »

To-Work-with-the-Annotation-Monitor

To Work with the Annotation Monitor To Work with the Annotation Monitor Turn on the annotation monitor for all events or model documentation events only. To Turn on the Annotation Monitor On the status bar, click the annotation monitor button: Find. The annotation monitor status bar button changes to , and an annotation monitor icon is added to the status ...

ادامه نوشته »

To-Work-with-the-Action-Recorder

To Work with the Action Recorder To Work with the Action Recorder Start, stop, or cancel macro recording; copy existing macros; and change the location where macros are saved. Start Recording an Action Macro Click Manage tab Action Recorder panel Record. Use the commands and provide the input that is needed to complete the task that you want to automate. ...

ادامه نوشته »

To-Work-With-Sunlight-Settings

To Work With Sunlight Settings To Work With Sunlight Settings You can specify the brightness, color, location, and angle of a “sun” light and turn it on or off. Enable the Sunlight System Click Visualize tab Sun & Location panel Dialog box launcher. Find In the Sun Properties palette, General category, click the Status field and select On or Off. ...

ادامه نوشته »

To-Work-With-Subobject-Selection

To Work With Subobject Selection To Work With Subobject Selection Limit Selection to Vertex Subobjects Home tab Selection panel Vertex. Find When you select a 3D solid or mesh subobject, only the vertex can be selected. Select Multiple Faces, Edges, or Vertices Press Ctrl+click as you select faces, edges, or vertices. NOTE: If a subobject selection filter is active, you ...

ادامه نوشته »

To-Work-With-SteeringWheel-Settings

To Work With SteeringWheel Settings To Work With SteeringWheel Settings Display the SteeringWheels Settings Dialog Box Right-click the drawing area and choose Options. On the 3D Modelling tab, under 3D Navigation, click SteeringWheels. Change the Wheel Size Under Big Wheels or Mini Wheels, move the Wheel Size slider. Change the Wheel Opacity Under Big Wheels or Mini Wheels, move the ...

ادامه نوشته »

To-Work-With-SQL-Queries

To Work With SQL Queries To Work With SQL Queries The SQL Query tab provides both a query editor where you can enter a free-form SQL query and a set of tools to assist you in constructing a query. Open the Query Editor Click Tools menu PalettesdbConnect. In the tree view, select a database table. Click the New Query button. ...

ادامه نوشته »

To-Work-With-Splines

To Work With Splines To Work With Splines A spline is a smooth curve that passes through or near a set of points that influence the shape of the curve. Draw a Spline Click Home tabDraw panelSpline. Find (Optional) Enter m (Method). Then enter either f (Fit Points) or cv (Control Vertices). Specify the first point of the spline. Specify ...

ادامه نوشته »

To-Work-With-Slicing-a-Solid-or-Surface

To Work With Slicing a Solid or Surface To Work With Slicing a Solid or Surface Slice a 3D Solid or Surface With a Cutting Plane Click Home tabSolid Editing panelSlice. Find Select the 3D solid or surface objects to slice. Press Enter. Specify two points to define the cutting plane. Specify which side of the sliced object to retain, ...

ادامه نوشته »

To-Work-With-Single-Line-Text-Changes

To Work With Single Line Text Changes To Work With Single Line Text Changes You can change the contents, formatting and properties of single-line text. Move, Scale, and Rotate Text Text objects have grips for moving, scaling, and rotating. A text object has grips at the lower-left corner of the baseline and at the alignment point. The effect of a ...

ادامه نوشته »

To-Work-With-Simple-Database-Queries

To Work With Simple Database Queries To Work With Simple Database Queries Construct simple or ranged queries to search values from one database table field at a time. Open the Query Editor Click Tools menu PalettesdbConnect. In the tree view, select a database table. Click the New Query button. Enter a name for the query in New Query Name. Click ...

ادامه نوشته »

To-Work-With-Sharing-Tool-Palettes-and-Tool-Palette-Groups

To Work With Sharing Tool Palettes and Tool Palette Groups To Work With Sharing Tool Palettes and Tool Palette Groups How to import and export tool palettes that you want to share. Export a Tool Palette or Tool Palette Group Click Manage tab Customization panel Tool Palettes. Find In the Customize dialog box, do one of the following: Export a ...

ادامه نوشته »

To-Work-With-Shading-and-Coloring-Faces

To Work With Shading and Coloring Faces To Work With Shading and Coloring Faces Apply visual styles, or transparency, for 3D object faces. Change 3D View Face Settings Available face settings vary for different styles. Click View tabVisual Styles panel Find. Alternatively, you can click View tabPalettes panel drop-down Visual Styles. Select any visual style, other than 2D Wireframe, to ...

ادامه نوشته »

To-Work-With-Setting-Mesh-Density

To Work With Setting Mesh Density To Work With Setting Mesh Density Set the Maximum Number of Mesh Faces At the Command prompt, enter SMOOTHMESHMAXFACE. Enter the maximum number of faces permitted for an object. You can set a value up to 16,000,000. Set the Maximum Smoothness Level for Mesh Objects At the Command prompt, enter SMOOTHMESHMAXLEV. Enter a value ...

ادامه نوشته »

To-Work-With-Setting-Associativity-for-Surfaces

To Work With Setting Associativity for Surfaces To Work With Setting Associativity for Surfaces Turn On Surface Associativity for New Surfaces Click Surface tabCreate panelSurface Associativity. Find Any new procedural surfaces will be associative. NOTE:NURBS surfaces cannot be associative. Display the Reference Surface of an Associated Surface Select an associative surface. In the Properties palette, under Surface Associativity, in the ...

ادامه نوشته »

To-Work-With-Selecting-a-Component-of-a-Composite-Solid

To Work With Selecting a Component of a Composite Solid To Work With Selecting a Component of a Composite Solid Select a Face, Edge, or Vertex on the History Form of a Composite Solid Click Home tab Selection panel Edge, Vertex, or Face. On the history form, click a face, edge, or vertex. NOTE: If the Show History property for ...

ادامه نوشته »

To-Work-With-Searching-for-Content

To Work With Searching for Content To Work With Searching for Content Search for Content by Category At the Command prompt, type the keyword that corresponds to the content you want to find. (Do not press Enter.) Spell the text as shown, with no spaces. block layer hatch textstyle dimstyle visualstyle (not available in AutoCAD LT) The command line suggestion ...

ادامه نوشته »

To-Work-With-Saving-and-Using-Profiles

To Work With Saving and Using Profiles To Work With Saving and Using Profiles How to save and use profiles that store individual settings. Save a Profile Click Application button Options. In the Options dialog box, Profiles tab, click Add to List. In the Add Profiles dialog box, enter a Profile name and Description. Click Apply & Close to record ...

ادامه نوشته »

To-Work-With-Reshaping-Mesh-Faces

To Work With Reshaping Mesh Faces To Work With Reshaping Mesh Faces Split a Mesh Face Click Mesh tabMesh Edit panelSplit Face. Find Click the mesh face that you want to split. To snap to a vertex of the face, enter v (Vertex). Click the location where you want to start the split. Click a second location to end the ...

ادامه نوشته »

To-Work-With-Removing-Hidden-Lines-When-Plotting

To Work With Removing Hidden Lines When Plotting To Work With Removing Hidden Lines When Plotting Remove Hidden Lines When Plotting from a Layout Tab Select a layout viewport. Double-click the viewport border to display the Properties palette. On the Properties palette, click Shade Plot. In the Shade Plot drop-down list, select Hidden. Click OK to plot the drawing. Remove ...

ادامه نوشته »

To-Work-With-Regions

To Work With Regions To Work With Regions Regions are 2D enclosed areas with physical properties such as centroids or centers of mass. Define Regions Click Home tabDraw panelRegion. Find Select objects to create the region. These objects must each form an enclosed area, such as a circle or a closed polyline. Press Enter. A message at the Command prompt ...

ادامه نوشته »

To-Work-With-Refining-Mesh-Faces-and-Objects

To Work With Refining Mesh Faces and Objects To Work With Refining Mesh Faces and Objects Refine a Mesh Face Set the subobject selection filter to select only faces: right-click anywhere in the drawing area. Click Subobject Selection Filter Face. Click Mesh tabMesh panelRefine Mesh. Find Click one or more mesh faces that you want to refine. Press Enter. (The ...

ادامه نوشته »

To-Work-With-Reference-Points

To Work With Reference Points To Work With Reference Points Use point objects as nodes or reference geometry for object snaps and relative offsets. Set Point Style and Size Click Format menu Point Style. Find In the Point Style dialog box, select a point style. In the Point Size box, specify a size, either relative to the screen or in absolute ...

ادامه نوشته »

To-Work-With-Rectangular-Arrays

To Work With Rectangular Arrays To Work With Rectangular Arrays How to create and edit rectangular arrays. To Create a Rectangular Array Click Home tabModify panel Rectangular Array. Find Select the objects to array and press Enter. A default rectangular array is displayed. On the array preview, drag the grips to adjust the spacing and number of rows and columns. ...

ادامه نوشته »

To-Work-With-Queries-Save-and-Reuse

To Work With Queries (Save and Reuse) To Work With Queries (Save and Reuse) Saved, or stored, queries can be edited, renamed, or copied into other drawings. Execute a Stored Query Click Tools menu PalettesdbConnect. In the dbConnect Manager, in the tree view, right-click a stored query. Click Execute. Edit a Stored Query Click Tools menu PalettesdbConnect. In the dbConnect ...

ادامه نوشته »

To-Work-With-Publishing-Options

To Work With Publishing Options To Work With Publishing Options Set preferences for output file location, multi-sheet name options, and layer information. Access the Publish Dialog Box Click Output tabPlot panelBatch Plot. Find Click Publish Options. NOTE:When you change settings in the Publish dialog box, you can save the settings to the Drawing Set Descriptions (DSD) file to reuse the ...

ادامه نوشته »

To-Work-With-Publishing-Jobs

To Work With Publishing Jobs To Work With Publishing Jobs You can check status of publishing jobs, view details, cancel them, or turn background publishing on or off. Check the Status of a Published Job You can check the status of a job being published in the background. Place the cursor over the plotter icon in the status tray. A ...

ادامه نوشته »

To-Work-With-Printer-or-Plotter-Configurations

To Work With Printer or Plotter Configurations To Work With Printer or Plotter Configurations To print a layout, you select a printer or plotter and configure the device as needed. Select a Printer or Plotter for a Layout Click the layout tab for which you want to specify a printer or plotter. Click Output tabPlot panelPage Setup Manager. Find In ...

ادامه نوشته »

To-Work-With-Pressing-or-Pulling-Bounded-Areas-or-Objects

To Work With Pressing or Pulling Bounded Areas or Objects To Work With Pressing or Pulling Bounded Areas or Objects How to create holes and objects by pressing and pulling. For best results, set your drawing to an isometric view before doing a press or pull operation. Push a Hole Into a 3D Solid Create a circle or other closed ...

ادامه نوشته »

To-Work-with-Pressing-or-Pulling-3D-Solid-Faces

To Work with Pressing or Pulling 3D Solid Faces To Work with Pressing or Pulling 3D Solid Faces How to extrude or offset a face using a press or pull operation. Offset a Bounded Area on a 3D Solid Face Use this method to adjust adjacent faces to the new position of the offset face. Click Home tab Modeling panel ...

ادامه نوشته »