About-Hatch-Pattern-Scaling

About Hatch Pattern Scaling

About Hatch Pattern Scaling

The scale of hatch patterns can be set individually, or it can be set automatically
based on the scale of each layout viewport.

  • If you create hatch patterns exclusively for a single view or at a constant scale,
    you can set the current hatch scale manually in the interface or with the HPSCALE
    system variable.
  • If you work with layout viewports in different scales, you can apply scale factors
    automatically by creating annotative hatches. This method is more efficient than creating duplicate hatch pattern objects
    with different scale factors.
NOTE:To prevent accidentally creating an enormous number of hatch lines, the maximum number
of hatch lines created in a single hatch operation is controlled by the HPMAXLINES
system variable. This limit prevents memory and performance problems. Similarly the
number of enclosed areas in single hatch is limited by the HPMAXAREAS system variable.
Starting in the 2012 release, hatches that are too sparse are also changed to solid fills. This is not always desired, so to restore the legacy
behavior, which leaves sparse hatches blank, set HPMAXAREAS to 0.

Learning AutoCad

e scale of hatch patterns can be set individually, or it can be set automatically based on the scale of each layout viewport. If you create hatch patterns …hatch pattern scale.hatch pattern name, to make the appearance match, one drawing has to have the hatch pattern scale approximately 25 bigger than the other. … AutoCAD has two hatch pattern files. acad.pat (imperial) and acadiso.pat (metric) The pattern that is used …hatches also need to be scaled to suit the final drawing scale. Start with the common ANSI31 pattern. As defined, it produces parallel …hatch in scale 0.01 it does not come up. Tried to change the … I'm using 'gravel' hatch pattern in this case. The hatch is …hatch in ground floor any pattern with scale 30 itsok. but when i hatch same pattern in first…26 Feb 201314 Sep 2013hatch pattern properly at a scale of 1.0. What variable would cause this difference in scale?… A user-defined hatch pattern just lets you specify the angle of the pattern and its scale. Changing the scale is an especially easy way to correct …