About-Creating-Solid-Cones

About Creating Solid Cones

    About Creating Solid Cones

    Create a pointed or frustum of a cone with a circular or elliptical base.

    By default, the base of the cone lies on the XY plane of the current UCS. The height of the cone is parallel to the Z axis.

    Cone Creation Options

    Use the following options to control the size and rotation of the cones you create:

    • Set the height and orientation. Use the Axis Endpoint option of the CONE command. Use the Top Radius option to specify
      the axis endpoint as the point of the cone or the center of the top face. The axis
      endpoint can be located anywhere in 3D space.
    • Create a frustum of a cone. Use the Top Radius option of the CONE command to create a frustum, which tapers to
      an elliptical or planar face.

      The Frustum tool is also available from the Modeling tab of the tool palette. You
      can also use grips to modify the tip of a cone and convert it to a flat face.

    • Specify circumference and base plane. The 3P (Three Points) option of the CONE command defines the size and plane of the
      base of the cone anywhere in 3D space.
    • Define the angle of the taper. To create a conical solid that requires a specific angle to define its sides, draw
      a 2D circle. Then use EXTRUDE and the Taper Angle option to taper the circle at an
      angle along the Z axis. This method, however, creates an extruded solid, not a true solid cone primitive.

    Learning AutoCad

    >Create a pointed or frustum of a cone with a circular or elliptical base. … Use the Top Radius option of the CONE command to create a frustum, which tapers to an elliptical or planar face. … To create a conical solid that requires a specific angle to define its sides, draw a 2D circle.Create a Solid Cone With a Circular Base Click Home tabModeling panelCone. Find Specify the center point of the base. Specify the radius or diameter of the …cone is a three-dimensional geometric shape that tapers smoothly from a flat base to a point … If the enclosed points are included in the base, the cone is a solid object; otherwise it is a ….. Create a book · Download as PDF · Printable version …creating solid primitives, which … For example, the Cone tool creates a solid cone with a circular or elliptical base.To create an X-Cone. Do one of the following. Click the Cone tool button ( ) on the X-Solids toolbar. Choose Cone in the X-Solids menu.cone. …. Attached is a video to create a cone, this shows the steps from after you have drawn …